Page Comparison

...

Connecting the header cables to the PiSugar and RaspberryPi

Flashing the PiKVM image

Image Added

1. Download the latest DIY PiKVM image for the HDMI-CSI bridge for the RaspberryPi Zero 2W and sha hash.

2. Validate the download image:

   Code Block
   PiKVM % shasum v2-hdmi-zero2w-latest.img.xz cdb1bb899a72351a2da924ceb0675130d01e46ed v2-hdmi-zero2w-latest.img.xz PiKVM % cat v2-hdmi-zero2w-latest.img.xz.sha1 cdb1bb899a72351a2da924ceb0675130d01e46ed%

3. Download the latest version of the DappNode ISO for Debian, attended, and note the sha1 hash.
   

4. Download and install the Raspberry Pi imager.

   1. Run RPi Imager:

      

   2. Press NO FILTERING then CHOOSE OS and select Use custom image at bottom of the list:

      

   3. After clicking on this item, select the image file for PiKVM that you downloaded earlier then click CHOOSE STORAGE:

      

   4. Insert the memory card into the card reader. Choose the card reader from this list. Be careful and choose the right device:

      

   5. After choosing the memory card, press the WRITE button. Confirm the operation when you are asked about it:
      

      

5. Mount the PiKVM memory card, and edit the filepikvm.txt. If you haven't enabled PiKVM yet, this file will contain a single line FIRST_BOOT=1.

...